Sherline Direct Cart items: 0  Total: $0.00
 
Turner's Cube Kit without 4-jaw chuck
Turner's Cube Kit without 4-jaw chuck

Product #: T1000
Price: $82.00

Quantity:

Everything you need to make a cube puzzle

Here’s a fun project that you can make within an hour or two that will amaze your friends. When done, a tiny cube with a hole through it is contained inside another cube with a hole in it. Both of those are inside a third 3/4″ cube with a hole in it. How did they get in there? How was it made? The kit includes an aluminum cube to practice on and a brass cube for your finished puzzle. Producing the finished cube requires a series of drilling and boring processes explained in the 4 pages of step-by-step illustrated instructions that come with the kit.

The T1000 kit includes both an aluminum and a brass billet of 3/4″ square stock cut to slightly over 3/4″ long ready for you to make this interesting puzzle on your Sherline lathe and mill. (It can also be made using just the lathe.) Included are a P/N 7600 3/8″ tool post, two P/N 3061 boring tools (one is custom ground as an undercut tool), a 1/8″ drill, a #2 center drill, a key ring and instructions. Complete instructions are included with the kit that take you step-by-step through the facing, drilling and boring processes needed to free up the cubes within the raw stock.

t1000_cube01
Finished cubes in aluminum and brass

t1000_cube11

Download PDF Assembly and Instruction Guide

Instructions PDF Download




 

Site Map