Sherline Direct Cart items: 0  Total: $0.00
10" Vertical Mill with Zero Adjustable Handwheels Package A

Product #: 5500A/5510A

[Add to Wishlist]

15" Extended column + $94.50
18" Extended Mill Table + $186.25
Accordion Way Cover Set + $52.50
In stock

NOTE: Photo shows a standard Model 5000 mill with standard handwheels. The 5500/5510 model looks identical except for the addition of adjustable "zero" handwheels on each axis.

The 5000 (5100 metric) mill can be ordered with adjustable "zero" handwheels replacing the standard handwheels that would normally come with that model. Adjustable handwheels allow the machinist to option of resetting the handwheel to zero (or any desired value) at any time. A locking screw is loosened, allowing the read collar to be rotated without moving the handwheel. The collar can be reset to a zero reading and the locking screw retightned to re-engage the collar so it moves with the handwheel. Being able to zero the handwheel at any time makes it easier to calulate your feed distance or stopping point for the next feed, thereby eliminating math errors.

Included with the mill are the following accessories:

  • 1072 1/4" Jacobs Drill Chuck
  • 3013 Step Block Hold-down Set
  • 3020 5/32" Sherline Hex T-Driver
  • 3021 3 pc. Center Drill Set
  • 3052 Fly Cutter w/ Carbide bit
  • 3060 3-pc. Mill Collet Set w/ Drawbolt
  • 3079 3/8" End Mill Holder
  • 3551 Milling vise
  • 5327 Sherline Accessories Shop Guide book
  • 7401 6-pc. 3/8" Shank End Mill Set

Available in your choice of inch or metric handwheel graduations.

Specifications -

Max clearance (table to spindle): 8.00″ (203 mm)
Throat (no spacer): Optional
Throat (w/ headstock spacer): Adjustable
Travel, “X” Axis: 8.65″ (220 mm)
Travel, “Y” Axis: 3.00″ (76 mm)
Travel, “Z” Axis: 6.25″ (159 mm)
Hole through spindle: .405″ (10 mm)
Spindle nose thread: 3/4″-16 T.P.I.
Spindle nose taper: #1 Morse
Handwheel graduations: .001″ (.01 mm)
Electronically controlled spindle speed range: 70 to 2800 RPM
Width Overall: 14.75″ (375 mm)
Depth Overall: 11.75″ (298 mm)
Height Overall (Max.): 20.75″ (527 mm)
Table size: 2.75″ x 13.00″ (70 x 330 mm)
Hold-down provision: 2 T-Slots
Shipping Weight: 30 lb. (13.6 kg)
Movements in addition to X-, Y- and Z-axes: Headstock rotation 90° left/right
Column rotation: 90° left/right
Column pivot: 90° forward/back
Column swing: 90° left/right
Column travel: (in/out) 5.5″ (140 mm)
Motor: 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. Click here for motor specifications
Spindle Speed Range: 70-2800 RPM continuously variable by electronic speed control

Download PDF Assembly and Instruction Guide

Instructions PDF Download


May we also suggest
Manual Rotary Table
Manual Rotary Table
Tilting Angle Table
Tilting Angle Table
4" x 10" Mill Tooling Plate


Site Map