The model 4500/4530 lathe is a standard model 4000/4100 3.5” x 8” lathe upgraded to include adjustable “zero” handwheels. The lathe includes the motor and its speed controller, a 2.75" (70mm) x 6.0" (152mm) crosslide, 15" (381mm) steel bed to allow 8" (203mm) between centers, pulleys, belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet. This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned over the bed. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed.Adjustable zero handwheels allow the user to reset the handwheel to a zero reading at any time without moving the leadscrew. This makes dialing in the next dimension easier, as you are starting from zero each time. It also helps eliminate math errors. This is a feature normally found on expensive full-size machines, but not often available on a machine of this size and price.
This package includes:
- 2.5" 3-jaw Chuck
- 1/4" Tailstock Chuck
- 1074 Steady rest
- 1191 Live Center
- 3002 Cutoff Tool and Holder
- 3007 3-pc 1/4" HSS Cutting Tool Set (LH, RH, Boring)
- 3020 5/32" T-driver
- 3021 3-pc Center Drill Set
- 5327 Sherline Accessories Shop Guide Book
- 1270 (1280 metric) Compound Slide
- 3100 Thread Cutting Attachment
Available in your choice of inch or metric handwheel graduations.
Swing Over Bed: 3.50″ (90 mm)
Swing Over Carriage: 1.75″ (45 mm)
Distance Between Centers: 8.00″ (200 mm)
Hole Through Spindle: .405″ (10 mm)
Spindle Nose Thread: 3/4″-16 T.P.I.
Spindle Nose Taper: #1 Morse
Travel of Crosslide: 4.25″ (110 mm)
Tailstock Spindle Taper: #0 Morse
Protractor Graduations: 0° to 45° by 5°
Handwheel Graduations: .001″ (.01 mm)
Length Overall: 23.5″ (597 mm)
Width Overall: 10.5″ (267 mm)
Height Overall: 8.5″ (216 mm)
Shipping Weight: 24 lb. (10.9 kg
Motor: 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. Click here for motor specifications
Spindle Speed Range: 70-2800 RPM continuously variable by electronic speed control
Other ordering options:
Similar to the XYZ bases for our mills, you can now order the lathe without the headstock, motor, or speed control. Please see the selections in the drop down menu above.
Download PDF Assembly and Instruction Guide