The 4000/4100 lathe can be ordered with a 3-jaw chuck and 1/4" drill chuck. These are the most often-used accessories on a lathe, and buying them as a money-saving package essentially means the drill chuck is free.
Included with the lathe is a P/N 1041 2.5" 3-jaw chuck that threads onto the headstock spindle to hold parts or material. Also included is a 1/4" Jacobs drill chuck with both #0 arbor for use in the tailstock for center drilling. Included with the lathe is a #1 Morse arbor and drawbolt that can replace the #0 Morse arbor so this chuck can also be used in the headstock as well.
Available in your choice of inch or metric handwheel graduations.
This package includes:
- 2.5" 3-jaw Chuck
- 1/4" Tailstock Chuck
Swing Over Bed: 3.50″ (90 mm)
Swing Over Carriage: 1.75″ (45 mm)
Distance Between Centers: 8.00″ (200 mm)
Hole Through Spindle: .405″ (10 mm)
Spindle Nose Thread: 3/4″-16 T.P.I.
Spindle Nose Taper: #1 Morse
Travel of Crosslide: 4.25″ (110 mm)
Tailstock Spindle Taper: #0 Morse
Protractor Graduations: 0° to 45° by 5°
Handwheel Graduations: .001″ (.01 mm)
Length Overall: 23.5″ (597 mm)
Width Overall: 10.5″ (267 mm)
Height Overall: 8.5″ (216 mm)
Shipping Weight: 24 lb. (10.9 kg
Motor: 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. Click here for motor specifications
Spindle Speed Range: 70-2800 RPM continuously variable by electronic speed control
Other ordering options:
Similar to the XYZ bases for our mills, you can now order the lathe without the headstock, motor, or speed control. Please see the selections in the drop down menu above.
Download PDF Assembly and Instruction Guide