Sherline Direct Cart items: 0  Total: $0.00
 
Follower Rest
Follower Rest

Product #: 1090
Price: $73.50

[Add to Wishlist]

Quantity:
In stock

1090_Lathe-Follower-Rest

 

The purpose of the follower rest is to keep long or small diameter work from deflecting when a cutting tool is applied to it. It is attached to the lathe saddle and moves as the saddle moves, keeping the point of support directly behind the cutting tool. This helps you maintain accuracy on long cuts and on small diameter stock.The follower rest is mounted to the lathe saddle with one 10-32 set screw. It is not necessary to drill any mounting holes, and full instructions are provided for use. A support bar is attached to the table using a T-nut in the table slot. The support and T-nut are also provided. A small set screw adjustment at the end of the support presses down on the follower base to keep it from rising. It slides along the top of the follower base, allowing the tool post and tool to be moved in and out while still keeping downward pressure on the follower rest.

Replacement Parts:

10870 - Follower Rest Body
10890 - Hold Down Tab
10940 - 10-32 x 3/8″ Set Screw with Nylon Tip
10880 - 2 Brass Pads (11741, individual pads)
30565 - Modified T Nut .160
40510 - 10-32 x 3/8″ SKT HD Cap Screw
40600 - 10-32 x 1/4″ Flat Point Set Screw
40660 - #10 Washer 3/16
40770 - 10-32 x 5/16″ SKT HD Cap Screw

Download PDF 1090 Instructions

Instructions PDF Download

 

 




May we also suggest
Steady Rest
Steady Rest


 

Site Map