Sherline Direct Cart items: 0  Total: $0.00
 
14
14" 8-Direction Mill Package A with DRO

Product #: 2000A-DRO/2010A-DRO

[Add to Wishlist]

18" Extended Mill Table + $194.25
Accordion Way Cover Set + $52.50
Quantity:
In stock

The 2000 (inch) or 2010 (metric) deluxe 8-direction mill with 14" base can be ordered with a selection popular accessories. Included are all the items you need to set up for most milling jobs including cutting tools and holding fixtures.

Included with the mill are the following accessories:

  • 1072 1/4" Jacobs Drill Chuck
  • 3013 Step Block Hold-down Set
  • 3020 5/32" Sherline Hex T-Driver
  • 3021 3 pc. Center Drill Set
  • 3052 Fly Cutter w/ Carbide bit
  • 3060 3-pc. Mill Collet Set w/ Drawbolt
  • 3079 3/8" End Mill Holder
  • 3551 Milling vise
  • 5327 Sherline Accessories Shop Guide book
  • 7401 6-pc. 3/8" Shank End Mill Set

Available in your choice of inch or metric handwheel graduations.

Specifications -

Max clearance (table to spindle) : 9.00″ (229 mm)
Throat (no spacer): Adjustable
Throat (w/ headstock spacer): Adjustable
Travel, “X” Axis: 8.65″ (220 mm)
Travel, “Y” Axis: 7.00″ (178 mm)
Travel, “Z” Axis: 5.38″ (137 mm)
Hole through spindle: .405″ (10 mm)
Spindle nose thread: 3/4″-16 T.P.I.
Spindle nose taper: #1 Morse
Handwheel graduations: .001″ (.01 mm)
Electronically controlled spindle speed range: 70 to 2800 RPM
Width Overall: 15.00″ (381 mm)
Depth Overall: 22.25″ (565 mm)
Height Overall (Max.): 23.38″ (568 mm)
Table size: 2.75″ x 13.00″ (70 x 330 mm)
Hold-down provision2 T-Slots
Shipping Weight
45 lb. (20.1 kg)
Movements in addition to X-, Y- and Z-axes
Headstock rotation (90° left/right)
Column rotation
90° left/right
Column pivot: 90° forward/back
Column swing
90° left/right
Column travel
(in/out) 5.5″ (140 mm)
Motor
90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. Click here for motor specifications
Spindle Speed Range
70-2800 RPM continuously variable by electronic speed control

NOTE: The electronic unit does not convert inch readings to metric and vice versa; however, it can be initialized to read properly with either an inch or metric Sherline leadscrew.

Download PDF Assembly and Instruction Guide

Instructions PDF Download

Download PDF DRO Guide

Instructions PDF Download




May we also suggest
Manual Rotary Table
Manual Rotary Table
7
7" x 13" Mill Tooling Plate


 

Site Map