The 4400-DRO/4410-DRO deluxe longbed lathe can be ordered with a selection popular accessories. Included are a selection of the most often asked for accessories to outfit your shop.
This package includes:
- 3.1" 3-jaw Chuck
- 3/8" Tailstock Chuck
- 1074 Steady rest
- 1191 Live Center
- 3002 Cutoff Tool and Holder
- 3007 3-pc 1/4" HSS Cutting Tool Set (LH, RH, Boring)
- 3020 5/32" T-driver
- 3021 3-pc Center Drill Set
- 5327 Sherline Accessories Shop Guide Book
Available in your choice of inch or metric handwheel graduations.
(NOTE: The unit does not translate dimensions from inch to metric. It must be initialized to work with the pitch of the leadscrew to which the handwheel is attached.)
Swing Over Bed: 3.50″ (90 mm)
Swing Over Carriage: 1.75″ (45 mm)
Distance Between Centers: 17.00″ (200 mm)
Hole Through Spindle: .405″ (10 mm)
Spindle Nose Thread: 3/4″-16 T.P.I.
Spindle Nose Taper: #1 Morse
Travel of Crosslide: 4.25″ (110 mm)
Tailstock Spindle Taper: #0 Morse
Protractor Graduations: 0° to 45° by 5°
Handwheel Graduations: .001″ (.01 mm)
Length Overall: 32.5″ (597 mm)
Width Overall: 8″ (267 mm)
Height Overall: 8″ (216 mm)
Shipping Weight: 31 lb. (14.1 kg)
Motor: 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. Click here for motor specifications
Spindle Speed Range: 70-2800 RPM continuously variable by electronic speed control
Other ordering options:
Similar to the XYZ bases for our mills, you can now order the lathe without the headstock, motor, or speed control. Please see the selections in the drop down menu above.
Download PDF Assembly and Instruction Guide