This accessory offers a great variety of setup options. With the base mounted square to the mill table, parts mounted to the tilted table can be machined or drilled at precise angles. It can be set at any angle from 0° to 90°. The hole pattern in the table accepts Sherline’s mill vise or rotary table. A threaded chuck mount is also included, which means parts from the lathe can have machining operations done on them without removing them from the chuck. They can then be put back on the lathe for further operations without re-centering.
With the rotary table mounted to the table and tilted, many additional machining possibilities are opened up. The pre-drilled and tapped hole pattern is laid out so that when the rotary table is rotated to the 90° position, its center is the same height as the right angle adjustable tailstock P/N 3702. This eliminates the need for the P/N 3701 right angle attachment.
Like the 90° Angle Plate P/N 3559 and the Rotary Table P/N 3700, this accessory can also be useful for setups on other machines in addition to your Sherline machines.
- Tilting Angle Table Material - Aluminum
- Body Coating - N/A
- Body Dimensions (H x W x D) - 2.625″ x 6″ x 4.125″
37540 - Tilting Angle Table Bottom Plate
37510 - Tilting Angle Table Top Plate
37520 - Tilting Angle Table Side Plate, Plain
37530 - Tilting Angle Table Side Plate, Engraved
37550 - (2) Tilting Angle Table Bushing
37560 - Tilting Angle Table 3/4-16 Chuck Hold Down
30561 - (4) 10-32 T-Nuts
40670 - (13) 10-32 x 1/2” SHC Screw
40660 - (2) 3/16” I.D. Washer
50120 - Pointer
32100 - 10-32 hex nut
50210 - 8-32 X 1/4″ Phillips Head Screw
Download PDF Instructions