Sherline Direct Cart items: 0  Total: $0.00
1/4" Drill Chuck with #1 Morse Arbor

Product #: 3072
Price: $52.50

[Add to Wishlist]

In stock

The Sherline Milling Machine makes an excellent precision drilling machine. Accurate positioning of both the “X” and “Y” axes provide a simple way to locate holes, and, although the SHERLINE does not have a quill feed, the “Z” axis feed screw does give you micrometer accuracy for depth control. The Drill Chuck is similar to the Tailstock Chuck used with the Lathe in that it is a 1/32″ (.79mm) to 1/4″ (6.35 mm) Jacobs Chuck mounted on a #1 Morse Arbor. The difference is that this arbor has been drilled and tapped for a Drawbar. The Drawbar prevents the arbor from working loose during use.

About the 1/4″ Drill Chuck and Drawbar

The P/N 3072 1/4″ chuck includes a #1 Morse arbor and drawbolt so that it can be mounted in the headstock of the lathe or mill. P/N 3072 has the same size capacity as the P/N 1072 chuck, which is 3/32 to 1/4″ drill sizes. P/N 3072 is usually purchased when it will be used only with a mill where the #0 Morse arbor is not required.


  • Chuck Capacity -  1/32″ (.8 mm) – 1/4″ (6.4 mm)
  • Arbor - #1 Morse for headstock
  • Runout - .003″ or less
  • Includes - chuck key, drawbolt+washer and 1 arbor 
NOTE: If runout of less than .003″ amount is required, collets should be used to hold the drill rather than a chuck.
Replacement Parts
11860 - Chuck key, 1/4″ drill chuck
11880 - threaded arbor, #1 Morse taper
11900 - 1/4″ drill chuck body
30880 - 1/4-20 x 5″ drawbolt with centering washer (for #1 Morse arbors)

Download PDF Instructions

Instructions PDF Download


May we also suggest
Individual WW Collets
Individual WW Collets
Mill Collets
Mill Collets


Site Map