Sherline Direct Cart items: 0  Total: $0.00
Two-position Tool Post (3/8
Two-position Tool Post (3/8" & 5/16")

Product #: 3008
Price: $26.25

[Add to Wishlist]

In stock

It is not unusual to have to stop and change lathe tools several times while turning a part on the lathe. The change may be to switch from a left-hand tool to a right-hand tool, from a sharp-nosed tool to a radius-tipped tool, or from a roughing tool to a finishing tool. Sherline’s standard tool post is sized to handle 1/4″ cutting tools, but there are also tools available with larger shanks that can be useful for special jobs. Whatever the reason, each change requires a little setup time. This time can be reduced by using a two-position tool post.

This tool post is designed to hold a 5/16″  tool on one side and a 3/8″  tool on the other side. By having one or more of these tool posts with your favorite lathe tool pre-mounted in them, you can simplify your work and reduce the time required to change tools.


May we also suggest
RH and LH 80° Carbide Insert Holders, 3/8
RH and LH 80° Carbide Insert Holders, 3/8" shank
55° Straight Carbide Insert Holder
55° Straight Carbide Insert Holder
55° Carbide Insert Holders
55° Carbide Insert Holders


Site Map