Sherline Direct Cart items: 0  Total: $0.00
5/32" Drill Chuck with #0 Morse Arbor

Product #: 1015
Price: $73.50

[Add to Wishlist]

In stock

The P/N 1015 Chuck is identical in capacity to the 1010 chuck above except that a #0 Morse arbor has been pressed into the Jacobs taper in the back of the chuck. It is used in the tailstock and does not require a drawbolt.

These chucks are useful for holding very small drills and their shorter length provides an increase of about 1/2″ in working space between centers compared to the 1/4″ drill chuck.

Runout as specified by manufacturer is .004″ or less but we try to maintain .003″ or less in our testing process. If runout of less than .003″ amount is required, collets should be used to hold the drill rather than a chuck.

NOTE: Because the arbor is pressed into the chuck, it is not interchangeable from chuck to chuck. A separate chuck must be purchased for #0 and #1 Morse use.


  • Chuck Capacity - 5/32″ (4 mm) – #80 (.0135″ or .34 mm)
  • Arbor - #0 Morse for headstock
  • Runout - .003″ or less
  • Includes - chuck key, drawbolt+washer
Replacement Parts

0 - 5/32″ chuck arbor, #0 Jacobs taper to #0 Morse taper
10180 - chuck key, 5/32″ drill chuck
10190 - drill chuck body

Download PDF Instructions

Instructions PDF Download


May we also suggest
5/32" Drill Chuck with #1 Morse Arbor


Site Map